Walkthrough - Setting Up and Invoicing Sales Prepayments

Prepayments are payments that are invoiced and posted to a sales or purchase prepayment order before final invoicing. You may require a deposit before you manufacture items to order, or you may require payment before you ship items to a customer. You use the prepayments functionality in Dynamics NAV to invoice and collect deposits that are required from customers or remit deposits to vendors. Thus, you can make sure that all payments are posted against an invoice.

Prepayment requirements can be defined for a customer or vendor for all items or selected items. After you complete the required setup, you can generate prepayment invoices from sales and purchase orders for the calculated prepayment amount. You can change the default amounts on the invoice as needed. For example, you can send additional prepayment invoices if additional items are added to the order.

About This Walkthrough

This walkthrough will take you through the following scenarios:

Roles

This walkthrough includes tasks for the following roles:

Story

Phyllis is an accounting manager. She makes decisions about which customers are required to pay a deposit before items are manufactured or shipped. Phyllis sets up Dynamics NAV to calculate prepayments automatically.

Susan is a sales order processor. When a customer calls to place an order, she enters the order into the system while the customer is on the telephone. This way, she can verify prices and payment terms with the customer immediately, and she can make adjustments to the order while she negotiates with the customer.

Arnie works in the Accounts Receivable department, where he posts invoices and payments.

In this scenario, Phyllis sets up prepayment requirements for the customer Selangorian, based on their credit history, and gives Susan instructions for how to handle their orders.

When the customer calls, Susan negotiates with the customer until they reach an agreement. She can then choose to calculate the prepayment in several different ways.

After Susan sends the prepayment invoice, the customer orders an extra item. Susan updates the order and creates a second prepayment invoice.

Arnie registers the customer's payment and applies it to the invoices, and then sends the final invoice.

Setting Up Prepayments

Phyllis sets up the system to handle prepayments for customers.

The following procedures describe how to complete Phyllis' tasks:

To set up number series for prepayments

  1. Choose the Search for Page or Report icon, enter Sales & Receivables Setup, and then choose the related link.
  2. In the Sales & Receivables Setup window, expand the Numbering FastTab.
  3. Verify that the number series for posted prepayment invoices in the Posted Prepmt. Inv. Nos. field is the same as for posted sales invoices (Posted Invoice Nos.) and the number series for posted prepayment credit memos (Posted Prepmt. Cr. Memo Nos.) is the same as for posted credit memos (Posted Credit Memo Nos.).

To block shipments for unpaid prepayment

  1. In the Sales & Receivables Setup window, on the General FastTab, select the Check Prepayment when Posting check box.

    Now you cannot ship or invoice an order that has an unpaid prepayment amount.

By default, Phyllis requires customer 20000 to be invoiced for a 30% down payment on all orders. Therefore, she will enter a default prepayment percentage on the customer card.

Phyllis requires all customers to be invoiced a 20% deposit for item 1100. Customer 20000 has a poor payment history. Therefore, she requires a 40% prepayment from customer 20000 for item 1100. The following procedure illustrates how to set up default prepayment percentages.

To assign default prepayment percentages to customers and items

  1. Choose the Search for Page or Report icon, enter Customers, and then choose the related link.
  2. Open the card for customer 20000 (Selangorian).
  3. In the Prepayment % field, type 30.
  4. Choose the OK button to close the customer card.
  5. Choose the Search for Page or Report icon, enter Items, and then choose the related link.
  6. Open the card for customer 1100.
  7. Choose the Prepayment Percentages action.
  8. Fill in two lines in the Sales Prepayment Percentages window as follows.

    Sales Type Sales Code Item No. Prepayment %
    Customer 20000 1100 40
    All Customers 1100 20
    IMPORTANT

    Depending on your country/region, you must also specify a tax group code on the Invoicing FastTab for items 1000 and 1100.

  9. Close all windows.

To specify an account for sales prepayments in general posting setup

  1. Choose the Search for Page or Report icon, enter General Posting Setup, and then choose the related link.
  2. Select the line where the Gen. Bus. Posting Group field is set to EXPORT, and the Gen. Prod. Posting Group field is set to RETAIL, and then choose the Edit action.
  3. In the General Posting Setup Card window, in the Sales Prepayments Account field, specify the relevant account.
  4. Choose the OK button.

Creating an Order that Requires a Prepayment

In the following scenario, Susan, the order processor, creates an order when talking to a customer. The items that the customer orders require a prepayment, and the customer has made some late payments in the past. Therefore, Susan has been instructed to require a fixed amount of 2,000 as a prepayment on the order.

The customer requests to be able to pay 35%, to which Susan can agree. Therefore, she changes the order.

Susan creates the prepayment invoice and sends it to the customer.

To create a sales order with a prepayment

  1. Choose the Search for Page or Report icon, enter Sales Orders, and then choose the related link.
  2. Choose the New action.
  3. In the Sell-to Customer No. field, select 20000.
  4. Accept the overdue balance warning that is displayed.
  5. Fill in two sales lines with the following information.

    Type No. Quantity
    Item 1000 1
    Item 1100 1

    By default, the prepayment fields on the sales line are hidden, so you must display them.

  6. Verify that the Prepayment % field on the line with item 1000 contains 30. The default value was taken from the sales header, which was populated from the customer card.

    The Prepayment % field on the line with item 1100 contains 40. This is the percentage you entered in the Sales Prepayment Percentages window for item 1100 and customer 20000.

    For more information, see How to: Set Up Prepayments.

  7. Choose the Statistics action.
  8. On the Prepayment FastTab, the Prepmt. Line Amount Excl. VAT field contains 1,560. If you create a prepayment invoice for the order now, then this is the amount that is displayed on the invoice.

    In this scenario, Susan has been instructed to suggest a total prepayment of 2000 for the order.

    IMPORTANT

    Depending on your country/region, the following step might not apply.

  9. Change the amount in the Prepmt. Line Amount Excl. VAT field to 2000 and then close the window.
  10. Verify the Prepayment % field on the sales lines, and you will see that it has been recalculated to 40.81625.

    The recalculation includes all lines that have a prepayment percentage that is greater than 0.

    Now the customer asks if the prepayment percent can be set to 35%. Susan's supervisor approves the change.

  11. In the Sales Order window, in the Prepayment % field, enter 35.

  12. In the warning that appears, choose the Yes button. A rate of 35% will be applied as the payment percentage for the whole order.
  13. Verify that the lines have been updated accordingly.

Creating a Prepayment Invoice

After entering the correct prepayment values on the order, Susan creates the prepayment invoice and sends it to the customer.

To create a prepayment invoice

  1. In the Sales Order window, choose the Post Prepayment Invoice action.
NOTE

Susan would select Post and Print Prepmt. Invoice and mail the invoice to the customer.

Creating an Additional Prepayment Invoice

The following day, the customer calls Susan and makes changes to the order. The customer wants two of item 1100. Susan reopens and updates the order, and then she creates a second prepayment invoice on the order and sends it to the customer.

To create an additional prepayment invoice

  1. In the Sales Order window, choose the Reopen action.
  2. On the line for item 1100, in the Quantity field, enter 2.

    Scroll to see the prepayment fields. The Prepayment Line Amount Excl. VAT field now contains 630, and the Prepmt. Amt. Inv. Excl. VAT field contains 315. This shows that there is an additional prepayment amount that has not been invoiced yet.

  3. To post an invoice for the additional prepayment amount, on the Actions tab, in the Posting group, choose Prepayment, and then choose Post Prepayment Invoice.

Applying the Prepayments

The customer pays the prepayments amount and Arnie, who works in the accounts department, registers the payment and applies it to the prepayment invoices.

To apply a payment to the prepayment invoices

  1. Choose the Search for Page or Report icon, enter Cash Receipt Journals, and then choose the related link.
  2. Fill in a journal line with the following information.

    Field name Enter
    Document Type Payment
    Account Type Customer
    Account No. 20000
  3. Choose the Apply Entries action.
  4. In the Apply Customer Entries window, select the first prepayment invoice, and then choose the Set Applies-to ID action.
  5. Repeat the previous step for the second prepayment.
  6. Choose the OK button.

    The amount field has now been filled in with the sum of the two prepayment invoices.

  7. Post the journal.

Invoicing the Remaining Amount

Now Arnie has been informed that the items on the order have been shipped and that the order is ready for invoicing. Arnie creates the invoice for the order.

To invoice the remaining amount

  1. Open the sales order.
  2. Choose the Ship and Invoice action, and then choose the OK button.
NOTE

Normally, the shipping department would have already posted the shipment.

Arnie can view the history to verify that the sales invoice was created as intended.

  1. Choose the Search for Page or Report icon, enter Posted Sales Invoices, and then choose the related link.

Next Steps

This walkthrough has taken you through steps to set up Dynamics NAV to handle prepayments. You have set up default prepayment percentages on customers and items, and you have also used different methods to calculate the prepayments on an order. You have tried to assign one total prepayment amount to the order, and you have had the prepayment amount calculated as a percentage of the whole order.

You have also posted a prepayment invoice, created a second prepayment invoice when the order has changed, and posted the final invoice for the remaining amount.

The prepayments functionality in Dynamics NAV makes it easy to set up and enforce prepayment rules for customers and items, and it enables you to post every payment against an invoice.

See Also

Invoicing Prepayments
Finance
Working with Dynamics NAV
Business Process Walkthroughs



© 2017 Microsoft. All rights reserved.